floating suction systems, floating roof drainage and skimmers
combine pipes with Swivel Joints, which allows a continuous transport of liquids during the movement of the piping system. Therefore this type of construction fulfills the specific requirements of tank storages perfectly.
Storage Tank Systems are characterized by:
Floating Suction System
The floating suction system allows the product to be drawn off directly at or below the liquid surface. This guarantees a product with a high quality standard, which is contaminated with water, dirt or other substances as little as possible. Therefore the floating suction systems are provided with a floater, which positions the suction hole independently of the tanks filling level right below the liquid surface.
| Nominal diameter: | 3″ / DN80 up to 32″ / DN800 |
| Material: | Carbon steel, stainless steel |
| Gasket material: | PTFE, viton, NBR, HPU |
| Connections: | according to customers specification |
| Swivel joint type: | W, LW, SO-W |
Further technical information: Foating Suction System
Floating Roof Drainage
Floating Roof Drainage continuously carry off rainwater from the floating roof of the tank. This process is independent of the tanks filling level and reduces the pressure on the floating roof. With such a floating roof drain system spillage and contamination of the product with rain water is avoided reliably.
| Nominal diameter: | 3″ / DN80 up to 12″ / DN300 |
| Material: | Carbon steel, stainless steell |
| Gasket material: | PTFE, viton, NBR |
| Connections: | Aaccording to customers specification |
| Swivel joint type: | W, LW, SO-W |
Skimmer
Skimmers allow to carry off contaminated fluids floating on the product in the tank storage. Skimmer use two floaters, which position the suction hole directly below the surface of the contaminated fluid. This ensures the skimming of the contamination independently of the tanks filling level in an optimal way.
| Nominal diameter: | 3″ / DN80 up to 12″ / DN300 |
| Material: | Carbon steel, stainless steel |
| Gasket material: | PTFE, viton, NBR |
| Connections: | according to customers specification |
| Swivel joint type: | W, LW, SO-W |
